Flow measurement of reservoir water
Ultrasonic clamp-on technology meets the challenge of reservoir flow measurement
Revolutionizing the flow measurement of reservoir water
The flow measurement of reservoir water is something that can pose a great challenge to measurement technology. With its associated short discharge times, high pressures and sometimes highly aggressive conditions, an accurate flow measurement solution was sought that could effortlessly tackle these issues, even in the harshest environments, ensuring effective reservoir management and enhancing gas production efficiency.
Klik om verder te gaan met lezen Revolutionizing the flow measurement of reservoir water
Product Solutions
The Flexim FLUXUS G80X SIL flow meter has always been the first choice when it comes to maintaining accurate measurements in harsh conditions – e.g. during the flow measurement of highly pressurised, aggressive, toxic or highly explosive gaseous media. The SIL 2 certification of the G80X SIL non-invasive flow meter includes the entire measuring system -the measuring transmitters and transducers.
-
Simple retrofitting during ongoing operation
ideal for a subsequent increase in safety
ideal for maintaining the protective function should an inline measurement fail -
Comprehensive certification
transducers, clamp device and electronics are part of the FMEDA -
Extremely wide range of applications
transducers and measuring transmitters for the flow measurement of gases
Fluid Type
All gases
Accuracy
Measurement uncertainty of the measuring system (volumetric flow rate): ±0.5 % of reading ±0,005 m/s (±0.02 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate): ± 1…3 % of reading ±0,005 m/s (±0.02 ft/s)
Measurement uncertainty at the measuring point (volumetric flow rate): ± 1…3 % of reading ±0,005 m/s (±0.02 ft/s)
Repeatability
0.15 % of reading ±0,005 m/s (±0.02 ft/s)
