Measurement Instrumentation for CIP and SIP Processes in Life Sciences
Reduce cross-contamination and improve safety with reliable instrumentation for Clean-in-Place, Steam-in-Place processes
Ensure effective sterilization of key process equipment
In the Life Sciences industry, Clean-in-Place and Steam-in-Place processes are carried out to ensure the health and safety of patients. Often CIP and SIP processes present measurement challenges that leave manufacturers unsure if their equipment is completely clean and sterile. Emerson's precise measurement instrumentation will help improve safety, increase efficiency, and will offer manufacturers complete assurance that their equipment is clean and sterile for the next process.
Click to continue reading Ensure effective sterilization of key process equipment
Product Solutions
Rosemount 2130 Level Switch is developed for challenging applications, tough operating conditions and safety critical environments. Its robust construction and built-in powerful diagnostics will allow you to focus on the essential part - your plant. It is a plug-and-play device, which means that it is easy to install and does not require any advanced configuration or calibration. It is also virtually unaffected by process conditions, which makes its measurements extremely reliable. The Rosemount 2130 is SIL 2 certified for safety instrumented systems. It will make sure that you stay safe from overfill, while at the same time optimizing your tank usage.
- Equipped with fork health monitoring, the device realizes if maintenance is needed
- Magnetic test point makes proof testing of the Rosemount 2130 easy
- Adjustable switching delay enables easy handling of turbulent or splashing conditions
Operating Pressure
Full vacuum to 1450 psi (Full vacuum to 100 bar)
Operating Temperature
-94 to 500°F (-70 to 260°C)
Safety
SIL2 IEC 61508 certified
TÜV tested and WHG approved for overfill prevention
TÜV tested and WHG approved for overfill prevention
Ideal for hygienic process-control applications, H-Series flow meters are accurate, low frequency, fit-and-forget meters with a compact, drainable, cleanable design. Get reliable performance under extreme process conditions, including entrained gas.
- Minimize variability in process control with superior sensitivity in a compact design
- Ensure product consistency and quality with superior density measurement
- Enable fast product change-over with self-draining design and superior temperature stability
Liquid Accuracy / Repeatability
Up to ±0.05% of rate (±0.025% repeatability)
Gas Accuracy / Repeatability
Up to ±0.35% of rate ( ±0.25% repeatability)
Density Accuracy / Repeatability
Up to ±0.0005 g/cm3 ( ±0.0002 g/cm3 repeatability)
The Rosemount 3051S MultiVariable Transmitter is a best-in-class solution customized to obtain measurement combinations of differential pressure, static pressure and process temperature. This multivariable transmitter is a cost-effective device that reduces pipe penetrations, impulse piping and connection systems. This device is also engineered with built-in flow calculations for fully compensated mass flow measurements.
- Measures multiple variables and standardizes on a single model number for streamline process and cost-efficiency
- Reduces costs by eliminating the need for stacked transmitters and additional wiring
- Primary elements available as assemble-to options for simple installation and commissioning
Warranty
Up to 15-year limited warranty
Rangedown
Up to 200:1
Communication Protocol
4-20 mA HART™, WirelessHART®, FOUNDATION™ Fieldbus
Featuring ultrasonic acoustic event detection that mounts externally, the Rosemount™ 708 Wireless Acoustic Transmitter offers a fast, cost effective installation. This device allows visibility into steam traps and pressure relieve valves (PRVs) by accurately communicating acoustic level and temperature data as well as device data, event status and leak detection via the
WirelessHART® network. The Steam Trap Monitor software (optional) provides real-time information about steam trap conditions, energy usage and emissions.
- Detects and transmits acoustic level and temperature data to increase visibility and monitor steam traps and PRV’s
- Directly mounts to process piping without cutting or changing pipe configurations for flexible, simple installation
- Steam Trap Monitoring software (optional) provides critical, real-time information on steam trap conditions
Acoustic Level
0-255 Counts
Operating Temperature
-40 to 260 °C (-40 to 500 °F)
Update Rate
1 second to 60 minutes, user selectable
The Rosemount 403 Conductivity Sensor, with integral cable, is a sanitary flange sensor commonly used in water purification systems within the food and beverage industry. This conductivity sensor is ideal for measuring electrolytic conductivity in water-for-injection (WFI).
- Sanitary design meets USP Class VI requirements
- Selectable cell constants of 0.01, 0.1, and 1.0/cm
- Available with 1-1/2-in. and 2-in. sanitary flange process connections
Temperature Range
32 - 221 °F (0 - 105 °C). Conductivity sensor is steam sterilizable to 275 °F (135 °C)
Process Wetted Materials
Electrodes: Titanium
Insulator: PCTFE (neoflon), compliant to 21CFR 177.1380 and USP Class VI
Body: 318 sst
O-Ring: EPDM, compliant to 21CFR 177.1380 and USP Class VI
Insulator: PCTFE (neoflon), compliant to 21CFR 177.1380 and USP Class VI
Body: 318 sst
O-Ring: EPDM, compliant to 21CFR 177.1380 and USP Class VI
Surface Finish
All wetted surfaces have 16 micro inch (0.4 micrometer) Ra finish
