Level Measurement of Granular Potash in Domed Storage
Accurately measure levels of finished potash stored in domed warehouses or large silos to reliably monitor inventory.
Reliable Level Monitoring with Non-Contacting Radar Technology
The finished granular potash product is transferred to on-site warehouses/large silos, where different grades of potash are stored separately. Granular potash results from compaction of the finely ground material and has very regular size and shape. The granular potash is stored in large domes that can reach 50m (165 ft) in diameter, making accurate measurement of the dome’s contents very difficult. This lack of reliable measurement impacts operators' inventory management and control capabilities.
Click to continue reading Reliable Level Monitoring with Non-Contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW and Smart Echo Supervision technologies, the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
