High Accuracy Level Measurement and Overfill Prevention in One Tank Opening
A simple way to add independent high level alarm to existing tanks without mechanical modifications
Improve Safety and Fulfil Standards With 2-in-1 Radar Technology
Many bulk storage tanks do not yet have independent overfill protection, and a common problem at brownfield sites is that there are no nozzles available for adding a high level alarm sensor. Mechanical modifications like adding tank openings may be prohibited due to cost and time constraints - especially if requiring an additional still-pipe, e.g. for a floating roof tank. Advancements in radar technology has created a 2-in-1 radar gauge that elegantly solves this problem. 2-in-1 radar level gauges can be used simultaneously for automatic tank gauging and independent safety level measurement, while using only one tank opening. The transmitter housing contains two separate radar level units that are galvanically separated and fully independent. This new solution has been verified by independent accredited third parties to be compliant with both IEC 61511 and API 2350, and the Rosemont 5900S 2-in-1 Radar Level Gauge is SIL3 and SIL2 certified according to the IEC 61508 standard.
Click to continue reading Improve Safety and Fulfil Standards With 2-in-1 Radar Technology
Product Solutions
The Rosemount 5900S Radar Level Gauge delivers ±0.5 mm (0.020 in.) instrument accuracy, reducing level measurement uncertainty to a minimum. It enhances your storage operation by providing certified custody transfer accuracy, better inventory management and reliable loss control data.
The Rosemount 5900S is normally combined with high precision multi-spot temperature sensors for highest accuracy API standard net volume calculations.
The Rosemount 5900S takes overfill safety to a higher level with an innovative 2-in-1 feature which includes two radar gauges in one housing for independent level and overfill measurement. It is SIL 2 and SIL 3 certified according to IEC 61508 and enables API 2350 compliant solutions.
The Rosemount 5900S is normally combined with high precision multi-spot temperature sensors for highest accuracy API standard net volume calculations.
The Rosemount 5900S takes overfill safety to a higher level with an innovative 2-in-1 feature which includes two radar gauges in one housing for independent level and overfill measurement. It is SIL 2 and SIL 3 certified according to IEC 61508 and enables API 2350 compliant solutions.
- Get highest certified custody transfer accuracy for precise asset management of bulk liquid storage.
- Achieve higher safety with third party certified IEC 61508 SIL 2 or SIL 3 capability.
- Use one tank opening to install the 2-in-1 gauge for either redundant level measurements or to achieve independent safety and level measurement systems.
Accuracy
± 0.5 mm (± 0.020 in.).
Stability
Typically < ± 0.5 mm (0.020 in.) in -40 to +70 °C (-40 to +158 °F).
Update Rate
New measurement every 0.3 second.
The Rosemount 2410 handles data communication between field devices and the control room, and is available in two versions for single or multiple tanks. Control room communication options include Modbus, IEC 62591 (
WirelessHART® protocol) and emulation of other vendors’ protocols. The Rosemount 2410 also feeds power to Rosemount field devices on the FISCO compliant intrinsically safe Tankbus.
- Collect and transfer data from one or several tanks to the control room.
- Save installation cost by using the bus powered intrinsically safe two-wire Tankbus.
- Choose between several control room communication possibilities, including Modbus, IEC 62591 (WirelessHART® protocol) and emulation of other vendors’ protocols.
Tank Hub Versions
Single tank version: supports one Rosemount 5900S 2-in-1 gauge or two radar level gauges, type Rosemount 5300, 5408, or 5900 installed on the same tank.
Multiple tank version: for a Rosemount 5300/5408/5900 system configuration:
Multiple tank version: for a Rosemount 5300/5408/5900 system configuration:
- The software supports 16 field devices and 10 tanks per hub.
- Maximum five Rosemount 5300 or ten 5408 per hub.
Custody Transfer Approval
OIML R85:2008, and national certifications such as PTB, NMi etc.
Safety
• SIL 2 and SIL 3 certified.
• TÜV tested and WHG approved for overfill prevention.
• TÜV tested and WHG approved for overfill prevention.
Rosemount TankMaster is a powerful, easy-to-use Windows-based inventory management software package. Rosemount TankMaster collects real-time tank gauging data such as level, temperature, water interface level and pressure. It automatically calculates volume and mass for inventory and custody transfer for bulk liquid storage tanks. It also provides operator overview, configuration, setup and service for Rosemount tank gauging systems.
- Increase plant efficiency by getting a complete tank overview.
- Get real time inventory calculations with API standard net volumes.
- Achieve network interoperability with host systems and other vendors.
Tank Gauging
Data Level, temperature (average and spot), free water level, pressure, liquefied gas parameters (depending on system configuration).
Inventory Calculations
Total Observed Volume (TOV), Gross Observed Volume (GOV), Gross Standard Volume (GSV), Net Standard Volume (NSV), mass and density according to current API tables (6, 54, 24, A-D), ISO and other major standards.
LNG and Liquefied Gases: Support for full containment storage tanks, including: cool-down, leak detection and product profile temperature measurements, stratification monitoring and alarm handling as well as optional roll-over prediction.
LNG and Liquefied Gases: Support for full containment storage tanks, including: cool-down, leak detection and product profile temperature measurements, stratification monitoring and alarm handling as well as optional roll-over prediction.
Alarm Handling
Set-point alarms, alarm summary, alarm log and alarm event log.
