Level Measurement Solutions for 3-Phase Separators
Reliable level measurement technology to optimize separation processes
Maximize Separation Process Efficiency with Accurate Level Technology
Three-phase separators are used to separate hydrocarbon fluids into three components: gas, oil, and water. The separation process requires accurate and reliable continuous level measurement to prevent carryover and carry under, whereby free liquid leaves with the gas phase, affecting the process efficiency. Carryover can mean the liquid level within the separator is too high. This can be prevented by using guided wave radar technology such as the Rosemount 3500 Level Transmitter with a single lead probe (either directly mounted or in a chamber), paired with vibrating fork switches such as the Rosemount 2120 for high- and low-level point measurement. Level measurement technology can also help to identify when high levels of sediment collect in the base of the separator to avoid blocked inlets or sediment from being drawn down lines and into pumps. The Rosemount 2140 Level Detector with sand switch functionality can be installed to detect unwanted sand buildup.
Click to continue reading Maximize Separation Process Efficiency with Accurate Level Technology
Product Solutions
The Rosemount 5300 Level Transmitter is ideal for challenging measurements on liquids, slurries, and solids, offering state of the art reliability and safety features in level and interface applications. Rosemount 5300 offers several advantages such as easy installation, no need for calibration, and is unaffected by process conditions. Also, it is SIL 2 certified making it your first choice for safety applications. It has a robust construction and features powerful built-in diagnostics allowing you to focus on the essential part - your plant.
- Direct Switch Technology gives increased sensitivity, high reliability, and long measurement ranges
- Signal Quality Metrics gives you the ability to work proactively with your level instrumentation
- Probe End Projection offers greater level measurement reliability
Accuracy
± 0.12 in. (3 mm)
Repeatability
± 0.04 in. (1 mm)
Measurement Range
Up to 164 ft (50 m)
The new Rosemount™ 2140 is the world's first wired HART® vibrating fork level detector for applications including overfill prevention, high and low level alarms, and pump protection. Providing reliable level detection of all liquids as well as sediments, the Rosemount 2140 offers greater ease-of-use and flexibility with smart diagnostics that continuously monitor electronic and mechanical device health, and a fully integrated remote proof-testing capability, helping to increase safety and efficiency of both plant and workers. The Rosemount 2140:SIS is certified to IEC 61508 (SIL 2) for safety-critical applications.
- World's only wired HART vibrating fork level detector.
- Dry/wet switching optimized for many media types. Includes wet sand settings for managing tank and separator efficiency.
- Dry/wet switching reliability is maximized even when the media properties are unknown. Especially important in small tanks and pipes where levels may rapidly change.
Operating Pressure
Full vacuum to 1450 psig at 122 °F psi (100 barg at 50 °C)
Operating Temperature
-40 to 302 °F (-40 to 150 °C) as standard. -94 to 500 °F (-70 to 260 °C) as option
Certifications/Approvals
ATEX, IECEx, USA, Canadian, see full specs for complete list of certifications
The Rosemount 2120 Level Switch provides easy to install, reliable level detection and control. 3
rdparty IEC61508 (SIL2) safety and hygienic certification with choice of outputs makes it suitable for a wide range of applications. It has no moving parts, needs no calibration and is virtually unaffected by process conditions. Adjustable switching delay prevents false switching in turbulent applications. Understand what is going on with your process- the visible heartbeat LED provides device status and health, and magnetic test point provides an easy-to-use functional test.
- Magnetic test point makes testing of the Rosemount 2120 easy
- Can be operated using the sun or battery as a power source with the 12Vdc option
- Fast drip fork design gives a quicker response time, especially with viscous liquids
Communication Protocol
Direct Load, PLC/PNP, Relay, 8/16 mA, NAMUR
Process Media Density
Minimum 37.5 lb/ft3 (600 kg/m3)
Viscosity
0.2 to 10000 cP (centiPoise)
