Level Measurement of Raw Coal Stockpiles
Accurately measure levels of raw coal despite challenging stockpile conditions to optimize feed to the crusher.
Continuous Material Monitoring with Non-contacting Radar Technology
Raw coal is delivered to a coal yard or warehouse in aggregate pieces of approximately 15 cm (6 in) that are later reduced in size by a crusher to approximately 4 cm (1.5 in). The raw coal is dusty and stored in irregular stockpiles in huge yards, making accurate measurement a challenge. Reliable level measurement is important to operators to ensure continuous flow to the crusher and predict inventory to meet shipping schedules.
Click to continue reading Continuous Material Monitoring with Non-contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
