Micro Motion™ High-Pressure Coriolis (HPC) Series Meter Consisting of HPC020N and 2500 Transmitter

Micro Motion™ HPC020N High-Pressure Coriolis Meter 1/6" (DN3), 16,401 psi (1131 BAR) maximum operating pressure

Gas mass flow and volume flow accuracy: ±0.5% of batch at standard conditions

Gas mass flow and volume flow repeatability: 0.25% of batch at standard conditions

Pressure Range: Rated up to 16,401 psi (1131 Bar) maximum operating pressure

Micro Motion 2500 Compact Control Room Multivariable Flow And Density Transmitter

Output variables: &emsp;•Mass & volume flow
&emsp;•Net product content / flow
&emsp;•Temperature
&emsp;•Density
&emsp;•Concentration

Power: &emsp;•Minimum 19.2 to 28.8 VDC
&emsp;•6.3 watts
&emsp;•Meets Installation (Overvoltage) Category II, Pollution Degree 2 requirements

Input/output signals: &emsp;•One active 4–20 mA output
&emsp;•One active frequencty output

Application types: &emsp;•Continuous process control
&emsp;•Two-phase flow/entrained gas
&emsp;•Meter verification

Micro Motion™ HPC020N High-Pressure Coriolis Meter 1/6" (DN3), 16,401 psi (1131 BAR) maximum operating pressure

Use one device for reliable and repeatable mass flow, volume flow, density, temperature measurement
Get the best real-world Coriolis performance at 16,401 psi (1131 Bar) maximum operating pressure
Minimize maintenance and boost long-term reliability with no moving parts to wear or replace
Maximize uptime using Smart Meter Verification to check system integrity without need to pull meter out of service
Accommodate any installation requirement with available two-wire, direct-connect (no transmitter needed), stainless steel and 5700 transmitters
XM-19 stainless steel wetted pathway resistant to hydrogen embrittlement
Suitable for use in 350 bar and 700 bar LDV/MDV/HDV hydrogen gas applications

Micro Motion 2500 Compact Control Room Multivariable Flow And Density Transmitter

Cut wiring expenses with a remote-mount transmitter using 35 mm DIN rail
Easily fit in control rooms – just a 0.03ft³ space requirement versus 1.0ft³ typically required for Coriolis transmitters
Simplify configuration with a four-wire connection to the sensors for power and signal
Diagnose for performance under entrained gas and batching from empty applications with MVD digital processing
Gain real-time and in-process measurement integrity assurance with Smart Meter Verification

Micro Motion™ HPC020N High-Pressure Coriolis Meter 1/6" (DN3), 16,401 psi (1131 BAR) maximum operating pressure

Micro Motion 2500 Compact Control Room Multivariable Flow And Density Transmitter

Maksymalna liczba produktów, które mogą być porównane, to 4. Sprecyzuj wybór. Dismiss