Level Measurement of Talc Powder Silos in Talc Production
Accurate measure talc powder levels in real-time despite harsh, dusty conditions to improve inventory management.
Continuous Inventory Monitoring with Non-Contacting Radar Technology
The final fine talc powder is stored in silos until it is packed or shipped in bulk. Talc powder generates a great deal of dust during the filling and emptying processes, leading to harsh, dusty conditions in the silo. Operators need to accurately measure the quantity of stored talc powder to meet delivery schedules, to satisfy the plant’s inventory reporting requirements, and to improve inventory management and control capabilities. Installing reliable switch technology helps control emptying and filling cycles.
Click to continue reading Continuous Inventory Monitoring with Non-Contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
