Level measurement in grinding and storage applications
Maintain accurate inventory of large particles, small particles and powders with non-contacting radar level technology
Ensure optimal material storage and maintain accurate inventory
During the grinding, materials undergo a milling process in which the solid particles are reduced to fine powder. The raw materials are then stored in silos or warehouses. Inside those, the material is in piles, often settling in irregular shapes, making it difficult for users to assess true inventory levels.
Non-contacting radar technology will help you to maintain accurate inventory. With the Rosemount 5408 you can monitor reliably applications with large particles involved. For applications with small particles and powders, the Rosemount 3408 is a suitable option. Finally, the Rosemount 2500 Switches will help you to prevent downtime with high- and low-level alarm.
Click to continue reading Ensure optimal material storage and maintain accurate inventory
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
Rosemount solids level switches provide flexible measurement of powders, grains, and pellets. Their compact size makes them suitable for installation in all sizes of vessels and silos. Four different technologies are available, so you can find the right solution for your process.
- Rosemount solid switches are maintenance free
- Rotatable and robust die-cast aluminium housing that allows orientation of electrical connection after mechanical installation
- Rosemount solid switches are insensitive to temperature or pressure changes
Dimensions
Extension Lengths:
2501 - ≤ (157") for extended tube, ≤ 10,000 mm (393") for rope version
2511 - ≤ (157")
2521 - ≤ (157") for extended tube, ≤ 20,000 mm (787.4") for cable version
2535 -≤ (157")
2555 - ≤ 20,000 mm (78,.7) for rod version, ≤ 20,000 mm (787.4") for rope and remote versions
2501 - ≤ (157") for extended tube, ≤ 10,000 mm (393") for rope version
2511 - ≤ (157")
2521 - ≤ (157") for extended tube, ≤ 20,000 mm (787.4") for cable version
2535 -≤ (157")
2555 - ≤ 20,000 mm (78,.7) for rod version, ≤ 20,000 mm (787.4") for rope and remote versions
Sensitivity
2501 - For media ≥ 15 g/l
2511 - For media ≥ 30 g/l
2521 - For media ≤ 5 g/l
2535 -For media ≥ 20 g/l
2555 - For media DC* ≥1.5
2511 - For media ≥ 30 g/l
2521 - For media ≤ 5 g/l
2535 -For media ≥ 20 g/l
2555 - For media DC* ≥1.5
Process Temperature
2501 - Temp. ≤ 1100°C
2511 - Temp. ≤ 150°C
2521 - Temp. ≤ 150°C
2535 - Temp. ≤ 150°C
2555 - Temp. ≤ 500°C
2511 - Temp. ≤ 150°C
2521 - Temp. ≤ 150°C
2535 - Temp. ≤ 150°C
2555 - Temp. ≤ 500°C
