Aucune image disponible
Aucune image disponible
Votre demande est en cours de traitement.
Sempell-P-model 802 swing check valve with power assist

Sempell Model 802 Swing Check Valve with Power Assist

Product Description

A free-swinging design enables the valve to close by disc weight, preventing damage in the turbine from reverse flow.

Caractéristiques

  • Low maintenance gland can be retightened
  • Hard-faced sealing faces at disc and body seat
  • Low friction by burnished shaft
  • Surfaces treated bearing faces on each part with relative motion
  • Easy to disassemble bodies.
  • Mechanical taking of control angle directly at disc lever
  • Mounting of pneumatic or hydraulic actuators.
  • Actuator mounting right or left possible seen from steam flow direction.
  • Universal connections by various design of welding ends and flanges as standard.
  • Deviating designs of welding ends in regardof dimension and material as well as other actuators, limit switches and special designs according to customers request can be supplied
Size
DN 350 - 800, NPS 14 -32
Pressure
up to PN160, up to class 900
Body sealing
Self sealing, cover sealing
Shaft sealing
Molded graphite packing rings
Closure time
< 2 sec.
Material
Body: SA217WC6
Shaft: 1.4122 nitriding Disc
lever = Hardfacings: 1.4115
Bearing sleeve 1.8550 nitriding
Leakage class
Leakage rate 2 acc. To DIN3220 part 3 or IEC 534 part 4, Class IV, test course 2, medium L
Connection
Welding ends acc. to EN/DIN and ASME

Documentation et schémas