Level Measurement of Rock Salt Material into Crushers for Potash Processing
Accurately measure raw material levels to ensure timely reloading for crushers despite fast-moving level changes.
Prevent Process Disruptions with Non-Contacting Radar Technology
Raw salt rock material is brought by trucks or conveyor systems into the crusher for initial grinding and size reduction. A screen (grizzly) may be included below the crusher to sort the rocks so that the smaller pieces go through, and the larger pieces are caught for re-grinding. A minimal amount of material should be maintained on the screen to act as a buffer to protect the screen from the impact of larger rock. As the material is brought into the crusher, it moves quickly through the crushing process. The fast-moving level must be monitored to determine when the material reaches a minimum level so that the next load can be started. Level measurement is challenging because the material is irregularly shaped and very dusty, and the overall distance may be as far as 30 m (98 ft).
Click to continue reading Prevent Process Disruptions with Non-Contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
