Level measurement in leaching applications
Accurate monitoring of acid distribution to prevent instabilities and optimize operations
Accurate level measurement that is unaffected by process conditions
Leaching is a process in which acid solutions are used to extract minerals from ore. Level measurement is required in the leaching process to monitor and control acid distribution, help detect plugged lines and flooding, prevent pad instabilities and provide better insight into leaching efficiency.
The monitoring of level measurement in leaching pads can be achieved by the Rosemount 5408 Non-Contacting Radar Level Transmitter, which is not affected by process conditions and handles very demanding applications.
Click to continue reading Accurate level measurement that is unaffected by process conditions
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
