Level Measurement for Radial/Rotary Stacker Systems in Metal Ore Operations
Accurately measure levels of material deposited by radial stacker systems to optimize operational responsiveness
Prevent Stacking Disruptions with Non-Contacting Radar Technology
Radial (rotary) stacker systems deposit the material as the stacker moves slowly across a defined area. The material can be kept in storage domes or open containers, which can get very dusty. In addition, the equipment and potential mounting location for a device are limited and subject to vibration and flying rocks. The combination of the movement of the stacker and the increasing height of the rock piles requires a fast response.
Level measurement is needed to measure surface levels and optimize operational responsiveness.
Click to continue reading Prevent Stacking Disruptions with Non-Contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW and Smart Echo Supervision technologies, the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
